|
File
Name |
Size |
Description |
|
|
|
|
|
UAT-WP26-01 |
27 KB |
Proposed
Agenda
of WG-5, Meeting #26, to be
held
at the Headquarters of RTCA in Washington DC starting on
Tuesday, Wednesday and Thursday, 11 - 13 August 2009 at 9:00am EDT |
|
UAT-WP26-02 |
35 KB |
Summary of Meeting #25 of WG-5, held
at the Headquarters of RTCA in Washington DC starting at 9:00am
EDT on
Tuesday through Thursday, 14 - 16 July 2009 |
|
UAT-WP26-03 |
5.2 MB |
Summary of all of the Proposed Changes
going into DO-242B and DO-260B as they may affect DO-282B, as
revised and agreed to during and after Meeting #26, as compiled and
maintained by Gary Furr |
|
UAT-WP26-04 |
11 MB |
DRAFT Version 3.0
of DO-282B for review, as compiled by Gary Furr |
|
UAT-WP26-05R1 |
277 KB |
In Response to
Action Item 25-06, Regarding the Proposed New Mode
Status Element Requirements and Test Procedures, as prepared and presented by
Chris Moody of Mitre
(Revision 1 edited
during the meeting) |
|
UAT-WP26-06R1 |
18 KB |
Proposed Clarifying
Notes to be added to Section 2.2.2.6 and Section 2.2.6.2.1, as
prepared and presented by Warren Wilson of Mitre
(Revision 1 edited
during the meeting) |
|
UAT-WP26-07R1 |
22 KB |
In Response to
Action Item 25-03, Regarding the Proposed Update to Appendix K,
as prepared and presented by Larry Bachman of JHU-APL
(Revision 1 edited
during the meeting) |
|
UAT-WP26-08R1 |
13 KB |
In Response to
Action Item 25-09, Regarding the Proposed Replacement Text for
DO-282B Section B.2 for the DO-242A ADS-B MASPS Compliance
Matrix, as prepared and presented by Stuart Searight and Dean
Miller
(Revision 1 edited
during the meeting) |
|
UAT-WP26-09R1 |
11 KB |
In Response to
Action Item 25-07, Regarding the Proposed Text to be Preserved
from the STP MOPS, which resulted in WG-3 agreeing to only
preserve "Source Selection," as presented to WG-3 by Don Walker
of Honeywell
(Revision 1 edited
during the meeting) |
|
UAT-WP26-10R1 |
43 KB |
In Response to
Action Item 25-04, Regarding the Specification of Requirements
and Test Procedures for the new Target State and Status Element,
as prepared and presented by Tom Mosher of Garmin
(Revision 1 edited
during the meeting) |
|
UAT-WP26-11R1 |
10 KB |
Proposed Additional
Test procedure for Verification of Total Latency, as prepared
and presented by Chris Moody of Mitre
(Revision 1 edited
during the meeting) |
|
UAT-WP26-12 |
53 KB |
In Response to
Action Item 24-07, Regarding the Updating of Appendix Q for NACV,
as presented by George Ligler and Stan Jones |
|
UAT-WP26-13R1 |
11 KB |
In Response to
Change Item Regarding GPS Alarm, as provided by Tom
Pagano
(Revision 1 edited
during the meeting) |
|
UAT-WP26-14 |
24 KB |
Proposal to Add An
Equipment Class "R" For "Receive-Only," as discussed during
Meeting #26 after being initiated by FAA AIR-130, represented by
Rich Jennings |
|
UAT-WP26-15 |
10 KB |
Proposal for the
Requirement for Latency as developed during Meeting #26 |
|
UAT-WP26-16 |
82 KB |
Proposal to Address
the Addition of a New Appendix for Backward Compatibility, as
presented by Chris Moody of Mitre |
|
UAT-WP26-17 |
163 KB |
Draft of a New
Appendix For Wake Vortex, as presented by George Ligler |
For more information on the activities of this Working Group please contact the
Working Group Secretary, Gary Furr at:
