RTCA SC-209 - Working Group #1
Mode S
Transponder MOPS
Meeting #06
Meeting #06:
To be held at
Engility Corporation, 400 Virginia Avenue, Washington DC 14 - 16
April 2008,
starting daily at 9:00am EDT
| File
Name |
Size |
Description |
|
ModeS-WP06-01R1 |
13 KB |
Proposed Agenda for Meeting #6
of RTCA SC-209 Working Group #1 for the Maintenance of the
Mode-S MOPS, to be held at
Engiilty Corporation,
400 Virginia Avenue, Washington DC on 14 - 16 April 2008 hosted by
Gary Furr and Engility
Corporation.
(Revision 1 reflects additional Working Papers presented during
the meeting) |
|
ModeS-WP06-02 |
32 KB |
Meeting Summary for
Joint Meeting #5
of RTCA SC-209 Working Group #1 and members of Eurocae WG-49,
for the Maintenance of the Mode-S MOPS, held at the Crowne Plaza Hotel in Melbourne
Florida on 11 - 14 February 2008 hosted by Rockwell Collins. |
|
ModeS-WP06-03 |
214 KB |
Proposed
Changes to the drafts of Both DO-181D and ED-73C for the
Resolution of Action Item 7-3, as presented by Bob Saffell of
Rockwell Collins |
|
ModeS-WP06-04 |
101 KB |
Proposed
Changes to the drafts of Both DO-181D and ED-73C for the
Resolution of Action Item 7-5, as presented by Bob Saffell of
Rockwell Collins |
|
ModeS-WP06-05 |
22 KB |
Proposed
Changes to the drafts of Both DO-181D and ED-73C for the
Resolution of WG-49 Action Item A12/13, as presented by Bob Saffell of
Rockwell Collins and Antoine Herve of DGAC |
|
ModeS-WP06-06 |
53 KB |
Clarification of
the Side Lobe Suppression issue originated by Antoine Herve and
commented on by Bob Saffell |
|
ModeS-WP06-07 |
3.4 MB |
Draft version "h" of
ED-73C as provided by Antoine Herve of WG-49 in preparation for
the April meeting. This Working Paper has had all edits
and changes accepted in an effort to provide a "cleaner" copy
for review. |
|
ModeS-WP06-08 |
6.3 MB |
Draft version 1.6 of
DO-181D as provided by Gary Furr. This draft has had all
modifications agreed to during the Melbourne Florida meeting
applied, as well as adding all of the ELS/EHS test procedures,
and the implementing of other issues raised by WP06-03, WP06-04,
WP06-05 and WP06-06 above. |
|
ModeS-WP06-09R2 |
22 KB |
Proposed Changes to the drafts of
Both DO-181D and ED-73C for the Resolution of Action Item
WG1-5-2 for proposed Extended Squitter Tests, as presented by
Bob Saffell of Rockwell Collins (revision
2 after discussion with WG-49
during the meeting) |
|
ModeS-WP06-10R1 |
21 KB |
Manufacturers Responses and
Proposed Changes Related to Action Item WG1-5-1, as compiled and
presented by Gary Furr (Rev 1 reflects
meeting agreement for general requirement and test, with further
manufacturer testing of hardware for agreed-upon numbers) |
|
ModeS-WP06-11R1 |
17 KB |
Trig Avionics Proposal for
Revising the Whisper-Shout Requirement and Test Procedure in
DO-181D, as presented by Martin Gray of Trig Avionics
(Rev 1 reflects revision of incorrect
titling of original and addition of analysis provided during the
meeting) |
|
ModeS-WP06-12R1 |
95 KB |
Proposed Changes to the Draft of
DO-181D to accommodate TCAS DO-185B, as presented by Bob Saffell
(revised during the meeting) |
|
ModeS-WP06-13 |
37 KB |
Issue Paper on Extended Squitter
ZERO Type Code Messages, as presented by Don Walker of Honeywell |
|
ModeS-WP06-14 |
19 KB |
Summary of Major Differences in
ED-73C and DO-181D as reviewed during the meeting, and presented
by William Thedford |
WG1 Meeting
#05 SC-209
Home
For more information on the activities of this Working Group of
SC-209 please contact the
Committee Secretary, Gary Furr at:
email: Gary.CTR.Furr@faa.gov
phone: (609) 485-4254
