RTCA SC-209 - Working Group #1
Mode S
Transponder MOPS
Meeting #04
Meeting #04:
To be held at RTCA Headquarters in Washington DC, 4 - 6
December 2007,
starting at 9:00am EST
| File
Name |
Size |
Description |
|
ModeS-WP04-01R1 |
14 KB |
Agenda for Meeting #4
of RTCA SC-209 Working Group #1 for the Maintenance of the
Mode-S MOPS, to be held at the facilities of RTCA in Washington
DC on 4 - 6 December 2007. |
|
ModeS-WP04-02 |
29 KB |
Meeting Summary for Meeting #3 of RTCA SC-209 Working Group #1, which was held at the facilities of
Engility Corporation in Washington DC on 2 - 4 October 2007.
|
|
ModeS-WP04-03 |
2,225 KB |
Draft version 1.2 of DO-181D as
updated after WG-1 Meeting #3 with all agreed changes, as
compiled and presented by Gary Furr of Engility Corp |
|
ModeS-WP04-04R1 |
464 KB |
Updates to the Environmental Test
procedures after the WG-49 Meeting in Cologne, as presented by
Bob Saffell of Rockwell Collins (Revision
1 reflects edits during Meeting #4) |
|
ModeS-WP04-05R1 |
302 KB |
Draft version 1.1 of DO-181D with
changes to the ELS/EHS Requirements if sections 2.2.24, 2.2.25
and 2.2.26 as discussed by Bob Saffell with WG-49
(Revision 1 reflects edits during Meeting
#4) |
|
ModeS-WP04-06R1 |
275 KB |
Draft version 1.0 of ED-73C with
changes to the ELS/EHS Requirements in Chapter 3 as discussed by
Bob Saffell With WG-49 (Revision 1
reflects edits during Meeting #4) |
|
ModeS-WP04-07 |
788 KB |
Latest Draft versions of DO-181D,
Appendix B and Appendix C with harmonization changes as
originally agreed during the Brussels Meeting and with
corrections and additions as defined during the SC-209 WG-1
Meeting #3, as presented by Gary Furr of Engility Corporation |
|
ModeS-WP04-08 |
239 KB |
Detailing the Proposed Changes in
Figures in Both DO-181D and ED-73C for the Purpose of
Harmonizing to one set of Figures, as presented by Gary Furr of
Engility Corporation |
|
ModeS-WP04-09 |
599 KB |
Interference Issues in Test
Procedures of ED-73C, section 5.4.7.2.e with comments from
Pierre Ruault, as presented by Bob Saffell of Rockwell Collins |
|
ModeS-WP04-10 |
21 KB |
Final Negotiated Proposed
Transponder Labeling Method Based on Equipment Level and
Installed Optional Additional Features, as presented by Richard
Jennings of the FAA and Kevin Hallworth of EASA |
|
|
|
|
WG1 Meeting
#03 WG1
Meeting #05

For more information on the activities of this Working Group of
SC-209 please contact the
Committee Secretary, Gary Furr at:
email: Gary.CTR.Furr@faa.gov
phone: (609) 485-4254