RTCA SC-209 - Working Group #1
Mode S
Transponder MOPS
Meeting #03
Meeting #03:
Held at Engility
Corporation in Washington DC, 2 - 4 October 2007,
starting at 9:00am EDT
| File
Name |
Size |
Description |
|
ModeS-WP03-01-R1 |
14 KB |
Revision "1" is the most
current proposed Agenda for Meeting #03
of RTCA SC-209 Working Group #1 for the Maintenance of the
Mode-S MOPS, to be held at the facilities of the
Engility
Corporation on Virginia Avenue in Washington
DC on 2 - 4 October 2007. |
|
ModeS-WP03-02-R1 |
42 KB |
Meeting Summary for Plenary Meeting #7 of RTCA SC-209, which was held at the facilities of
Eurocontrol in Brussels, Belgium, as a Joint Plenary Session
with Eurocae WG-49 on 20 - 24 August 2007.
(Minor revisions during Meeting #3 of Working Group 1) |
|
ModeS-WP03-03-R2 |
23 KB |
Proposed Transponder Labeling
Method Based on Equipment Level and Installed Optional
Additional Features, as presented by Nolan Van Foeken of Garmin
and Richard Jennings of the FAA
(Revision 2 as modified and agreed to between Rich Jennings and
Kevin Hallworth just after the meeting) |
|
ModeS-WP03-04-R1 |
160 KB |
Proposed Changes to Figures in Both DO-181D and ED-73C in order
to bring the Figures in both MOPS Documents into Harmonization,
as presented by Gary Furr of Engility Corporation
(Revision 1 as modified and agreed to during the meeting) |
|
ModeS-WP03-05-R1 |
41 KB |
Specific Proposed Changes to
DO-181D to ensure that all ICAO SARPs Change Proposals have been
accounted for, in response to Action Item 7-10, as presented by
Tom Pagano
(Revision 1 as modified and agreed to during the meeting) |
|
ModeS-WP03-06 |
4,862 KB |
Draft version 1.1 of DO-181D for
review during Meeting #3, as compiled by Gary Furr of Engility
Corporation |
|
ModeS-WP03-07-R1 |
480 KB |
Alignment of ED-73C Section 5.4
with DO-181D Section 2.3 for Environmental Test Procedure
Purposes. This revision is a follow up to WG49N12-11 which was
presented at WG49N12 by Robert Saffell of Rockwell Collins
(Revision 1 as modified and agreed to during the meeting) |
|
ModeS-WP03-08 |
281 KB |
Proposed ELS/EHS Requirements in
Section 3 of ED-73C, as presented by Eric Potier of Eurocontrol |
|
ModeS-WP03-09 |
730 KB |
Updated Draft of DO-181D, Appendix
B and Appendix C with the objective of Harmonizing with ED-73C,
as presented by Andy Leone of the FAA Technical Center |
|
ModeS-WP03-10-R1 |
15 KB |
Proposed Change to Section 2.1.5 of
DO-181D in light of Recent NTSB Recommendations, as presented by
Richard Jennings of the FAA
(Revision 1 as modified and agreed to during the meeting) |
|
ModeS-WP03-11 |
85 KB |
Details of the Suggested Change to
Figure 2-19 in the Draft of DO-181D, as presented by John Van Dongen of the FAA Technical Center |
|
ModeS-WP03-12-R1 |
13 KB |
Proposed Changes to the Extended
Squitter Test Procedure in 2.5.4.6, as presented by Raymond Bayh
of BAE Systems
(Revision 1 as modified and agreed to during the meeting) |
|
ModeS-WP03-13 |
15 KB |
Proposed Change to Manage
Transponder Transition, as presented by Eric Potier of
Eurocontrol |
|
|
|
|
|
|
|
|
|
WP ASP03-24-R1 |
20 KB |
Revision "1" represents the current Draft
of a proposal by the ICAO Aeronautical
Surveillance Panel (ASP) Airborne Surveillance Subgroup to alter
the definition of the TCAS/ACAS Bits in Register 1016,
as made available by Gary Furr of Engility Corporation |
|
|
|
|
WG1 Meeting
#02 WG1
Meeting #04
For more information on the activities of this Working Group of
SC-209 please contact the
Committee Secretary, Gary Furr at:
email: Gary.CTR.Furr@faa.gov
phone: (609) 485-4254
